How to install/change optical fiber laser cutting machine lenses safely?

The lens of the fiber laser cutting machine is used to prevent dust and slag splash from damaging the focusing lens, and it has a wide range of applications. So, do you know the installation steps and precautions of the optical fiber laser cutting machine lens? Today, I will give you a detailed introduction.

Installation steps of optical fiber laser cutting machine lens:

1. When placing the lens, you should pay attention to place it stably so as not to fall and break it. At the same time, pay attention to the convex surface of the lens and place it flat on a clean table. At the same time, pay attention to check whether there is any debris on the desktop to avoid confusion or affect the operating environment of the lens.

2. After the laser cutting machine lens is assembled, pay attention to the cleaning and dust removal of the lens. Use a clean air spray gun to clean it. Do not use an ordinary spray gun.

3. The lens of the cutting machine must be kept clean, and do not directly touch the surface of the lens with your hands, and strictly prevent other objects from directly contacting the surface of the lens.

Precautions for lens installation of fiber laser cutting machine:

1. Do not blow air on the lens of the laser cutting machine during assembly.

2. The lens of the laser cutting machine should be placed on a stable and clean table.　　

3. Do not touch the lens of the laser cutting machine with the part without gloves.

4. After the laser cutting machine lens is assembled, use a clean air spray gun to clean the lens dust and foreign matter.

The above content is a detailed introduction to the installation steps and precautions of the optical fiber laser cutting machine lens, I hope it will be helpful to everyone.